Yellow Porcelain Etch + Silan – Set for etching porcelain

Porcelain etchant used for repairing prosthetic restorations, as well as for etching porcelain veneers of crowns or inlays before their cementation.

Composition: 9.5% hydrofluoric acid, gel base, dye

Procedure:

Isolate the treatment area with a rubber dam.
Screw the flexible blue applicator onto the etch syringe in place of the lock nut.
Apply a small amount of the etchant on the matted and dried surface, and immediately close the syringe with the locking cap after use.
Leave the etchant on for 60 seconds, then rinse thoroughly and dry the preparation surface.
Use Silane in accordance with the manufacturer’s instructions for use.
Contains Silane and Yellow Porcelain Etch – hydrofluoric acid